Latest Forum Topics

Looking for supplier to silk screen on molded parts. : May 23rd - We are searching for a supplier that will do silk screen print on some molded parts. Any leads you could provide would be appreciated. Thank you. Doug Baril Nicolet Plastics, Inc. doug.baril@nicoletplastics.com 715-276-4217
Comment

Large Mold Needed : May 22nd - Currently, we have a requirement to build a mold for an ABS piece that has the following characteristics: >>>One piece dimensions: L 190cm x W 73.5cm x H 2.9cm on the deck side. >>>Wall thickness is about 1/4". There is ribbing on the bottom which is slightly thicker for added stability. >>>Additional reinforcement ribbing and mounting plate on the bottom extending ~ 7cm. >>>Supporting hanging weight capacity of ~ 100 lbs. If you know of a mold building resource that can address the design and development of this large mold, please contact: Tad Gharabegian V.P. Production Engineering Walker Digital Table Systems Global: +1-203-767-6100 tad.gharabegian@walkerdigital.com
Comment

Conflict Minerals Reporting : May 20th - A lot of our customers are asking us to comply with the new requirement concerning reporting Conflict Minerals. I was curious what others are doing to conform to this new regulation. Thanks, John
Comment

Tooling Service and Repair Shop Wanted in Southern California : May 11th - Injection Mold Tooling Service Shop wanted in Southern California. Do we have any members that are capable and willing to service injection molds in California? Tony Stewart
Comment

RoHS compliance : May 10th - We are seeing customer expectations related to RoHS compliance evolve into requirements that are becoming increasingly difficult to address. Typical requirements now read: A. Supplier shall maintain test and/or inspection records to substantiate RoHS compliance. B. A First Article report is required providing proof of compliance with the current EU RoHS directive. Knowing that resin manufacturers will not provide RoHS test/inspection data, there does not appear to be an alternative other than having product tested periodically. We wish to understand what other injection molders are doing when faced with similar requests. We also wish to know if anyone has developed legally defensible language with which to address requests to maintain RoHS test records. Thanks. Jim Franz
Comment

Group List

Bertschman, Dana - Quality Manager
Bolton, Todd - Quality Director
Branson, Cathy - Quality Analyst
Burrow, Emilie - Quality Manager
Campos, Jerry - Quality Manager
Cortte, Dan - Director of Quality
Cortte, Dan - Director of Quality
Fasano, Frank - Quality Manager
Ferguson, Cheryl - Director of Quality
Fowler, Allan - Quality Manager
Garcia, Lupe - Quality Manager
Greenhalgh, Mike - Director of Operations
Hardness, Jim - QA Manager
Hedge, Richard - Quality Manager
Hoath, Jason - Quality Manager
Hughes, Karen - Quality Director
Ienni, Greg - IT/ Quality Director
Jacobs, Kristy - Quality Manager
Johanasson, Gary - Quality Manager
Jordan, Laurie - Quality Assurance Manager
Justice, Todd - Quality Manager
Kalmbach, Jon - Quality Manager
Kapoor, Krishna - Quality Supervisor
Kiglics, Beverly - Director of Quality Assurance
Knopp, Lynn - Quality Manager
Koch, Steve - Quality Manager
Nelson, Griff - Quality Manager
Peck, Brad - Quality Manager
Roche, Bill - Director of Quality
Roseberry, Randy - Quality Manager
Routt, John - Quality Manager
Russell, Mike - Quality Manager
Schafer, Gerry - Eng & QA Mgr
Schnell, Michelle - Quality Manager
Schultz, Jim - Quality Manager
Smithson, Bob - Quality Manager
Steinmetz, Ryan - Quality Manager
Strayer, Kim - Product Development Manager
Thompson, LeeAnn - Quality Manager
Tuckey, Kim - Quality Manager
Ulaky, Tom - Quality Manager
Watkins, Matt - Quality Director`
White, Barry - Quality Assurance Manager
Wilson, Steve - Quality Manager