MAPP members have access to post on the forum and must be logged in to post. Questions? Please contact info@mappinc.com.

IQMS Realtime Manufacturing Process Monitoring Software

Post Reply
troyonix
Posts: 5
Joined: Mon Feb 05, 2018 12:02 pm

IQMS Realtime Manufacturing Process Monitoring Software

Post by troyonix » Mon Feb 05, 2018 12:45 pm

Dear MAPP Members:

Is anyone in the MAPP network who has IQMS using the "realtime manufacturing process monitoring" module as I have several questions and need help.

Thank you for any assistance you might be able to provide.

Chris Burkhead
Indiana Plastics
Phone: 574-294-3253
cburkhead(at)indianaplastics.com

aturrell
Posts: 11
Joined: Tue Feb 20, 2018 4:05 pm

Re: IQMS Realtime Manufacturing Process Monitoring Software

Post by aturrell » Wed Feb 21, 2018 10:09 am

Hi Chris,

I'm not sure if you have had a response to this yet outside of the forum, but we have several members utilizing this module. Last year, we benchmarked which modules in IQMS members are using, and you can access this document using the link below. If there is anyone specific you would like to make a connection with after reviewing, reach out to me at aturrell@mappinc.com and I would be happy to facilitate an introduction.

https://www.flipsnack.com/MAPPinc/2017- ... atrix.html

Thanks,

Ashley

cburkhead
Posts: 3
Joined: Mon Feb 26, 2018 10:23 am

Re: IQMS Realtime Manufacturing Process Monitoring Software

Post by cburkhead » Mon Feb 26, 2018 10:24 am

Thanks, Ashley!

mike@knobsource.com
Posts: 1
Joined: Fri Mar 09, 2018 4:19 pm

Re: IQMS Realtime Manufacturing Process Monitoring Software

Post by mike@knobsource.com » Fri Mar 09, 2018 4:20 pm

Chris - we are using Real Time. You can reach me at mike@knobsource.com

cbeavers
Posts: 16
Joined: Fri Mar 16, 2018 11:55 am

Re: IQMS Realtime Manufacturing Process Monitoring Software

Post by cbeavers » Fri Mar 16, 2018 11:56 am

Hello Chris!
We are using RealTime as well. You can reach out to me if you already haven't found a solution with the other members response. My email is cbeavers@par4plastics.com - will do what I can to help!

Thanks,
Chuck Beavers

AudreyZuvich
Posts: 1
Joined: Fri Mar 16, 2018 3:50 pm

Re: IQMS Realtime Manufacturing Process Monitoring Software

Post by AudreyZuvich » Fri Mar 16, 2018 3:52 pm

There is also a large forum at MyIQMS.com where you can ask questions and receive help on various topics about RealTime and any other IQ based module as well as training and crystal reports.

Post Reply