Hey members,
We are looking for any alternative solutions or applications to mitigate or eliminated the static electricity created by the vacuum loaders and materials used in the production floor. Your suggestions will be highly appreciated.
Thanks,
Domingo H.
Natech Plastics.
dhernandez@natechplastics.com
MAPP members have access to post on the forum and must be logged in to post. Questions? Please contact info@mappinc.com.
Static electricity
-
normandforest
- Posts: 2
- Joined: Fri Nov 16, 2018 5:25 pm
Re: Static electricity
Hi Domingo,
We switched over our hoses to the kind that has a wire embedded in the support ribbing of the hose. You install by cutting away some hose to expose the wire, then fold the wire inside when putting it on the pipe or wand. It helped out with grounding the static charge.
Best of luck and email me if you have any questions!
Norm
nforest@dymotek.com
We switched over our hoses to the kind that has a wire embedded in the support ribbing of the hose. You install by cutting away some hose to expose the wire, then fold the wire inside when putting it on the pipe or wand. It helped out with grounding the static charge.
Best of luck and email me if you have any questions!
Norm
nforest@dymotek.com