MAPP members have access to post on the forum and must be logged in to post. Questions? Please contact info@mappinc.com.

3 Shot Molding

Post Reply
vitalplastics
Posts: 4
Joined: Fri Jul 27, 2018 2:39 pm

3 Shot Molding

Post by vitalplastics » Wed Sep 16, 2020 5:40 pm

Good afternoon. I have a customer looking for someone to quote and run a 3 shot molding application for them. This is not something that we currently can offer and I am not aware of any non-medical molders in our area that offer this, so I am reaching out to the group to see if someone within the MAPP network is relatively close to us and can offer this service, or if you know of another molder again relatively close by who offers this service. Our customer is only 45 minutes away and we would prefer to keep any sources for this work nearby

If you run multi shot molding or know of someone in Central WI that does, please reach out. Thanks for your help!

Jack Pollitt
Engineering Manager
Vital Plastics, Inc.

RickCurtis4
Posts: 1
Joined: Fri Sep 18, 2020 4:51 pm

Re: 3 Shot Molding

Post by RickCurtis4 » Fri Sep 18, 2020 4:54 pm

Hi Jack,

We do three shot molding and are about 25 miles away from you.

You can reach me at our office at 715 235-1464 or email at rick.curtis@eirmed-devices.com

Rick Curtis
President
EirMed

lcarusostueck
Posts: 1
Joined: Wed Apr 25, 2018 11:14 am

Re: 3 Shot Molding

Post by lcarusostueck » Mon Sep 21, 2020 8:03 am

Hi Jack,

We are experienced in multi shot molding. Our Two Rivers facility is about 4 hours away from you.

You can reach out to our Business Development Manager, Dave Zielinski at 906-932-5025 ext 576 or dave.zeilinski@ironwood.com.

Thanks,

Lynn Stueck
General Manager
920-793-3060 ext 521

Post Reply