MAPP members have access to post on the forum and must be logged in to post. Questions? Please contact

Counting procedures?

Post Reply
Posts: 1
Joined: Mon Oct 05, 2020 10:28 am

Counting procedures?

Post by KyleTew2 » Mon Oct 05, 2020 10:38 am

Has anyone had any luck with a solid counting procedure for operators? We can not get an accurate part count from operators. We use a counting scale, grids, layers, tallys and clickers but nothing seems to be working.

Posts: 2
Joined: Fri May 31, 2019 10:42 am

Re: Counting procedures?

Post by GregNiblett » Fri Oct 16, 2020 2:34 pm

We had the same problem for years. There are in particular some parts that we make that are bulk packed in gaylords. We wouldn't go a month without multiple rejects between the 3 different but very similar parts; the rejects were all for incorrect quantities in the gaylords. We haven't had a reject for counting on these parts in more than 4 years, we have cobots do the counting and they do almost 2 gaylords of parts before needing any involvement from humans. It has been great!

Post Reply