Indiana Plastics company is looking for a used 500 Ton injection molding machine. The following our the specs we need:
Tonnage: 500 Ton
Minimum: 90 Oz Barrel
Minimum 23,000 psi injection pressure
Year: 2008 or newer
Process Monitoring = Yes
Type: Electric preferred but not a must
If you don't have one but have a good experience with a dealer of used equipment, I would gladly accept that help also.
MAPP members have access to post on the forum and must be logged in to post. Questions? Please contact firstname.lastname@example.org.
1 post • Page 1 of 1