Good afternoon, All. We're quoting a very large package and two of the parts are outside of our tonnage range. Both are being quoted using a custom compounded PC/ABS. Looking for a molder close Elkhart, IN. Please reach out if you have the tonnage and capacity.
Thanks,
Chris Burkhead
Impact Molding
chris.burkhead@impactmolding.com
MAPP members have access to post on the forum and must be logged in to post. Questions? Please contact info@mappinc.com.
Looking for capacity in 1500 and 3000 ton presses
-
gfish@rpsystems.com
- Posts: 5
- Joined: Fri Sep 21, 2018 11:01 am
Re: Looking for capacity in 1500 and 3000 ton presses
Hi Chris,
I am not sure if this is too far away but we have open capacity in Fraser, MI or Ankeny, IA in those size ranges. Let us know if we can assist.
I am not sure if this is too far away but we have open capacity in Fraser, MI or Ankeny, IA in those size ranges. Let us know if we can assist.
-
Troyonix29
- Posts: 51
- Joined: Mon Feb 26, 2018 10:09 am
Re: Looking for capacity in 1500 and 3000 ton presses
Chris, I know this is late, but I just wanted to make sure you knew that you can search member capabilities on the website. We have upgraded the search engine to use keywords or you can search by actual tonnage.
Under the Members tab select Search for Members.
Troy
Under the Members tab select Search for Members.
Troy