MAPP members have access to post on the forum and must be logged in to post. Questions? Please contact info@mappinc.com.

Mold Lubrication

Post Reply
jcoatter
Posts: 1
Joined: Tue Mar 12, 2019 1:45 pm

Mold Lubrication

Post by jcoatter » Tue Mar 12, 2019 1:53 pm

Looking for suggestions on the best lubrications (brands and types) to use on injection molds for clear or white parts? We are having issues with grease bleeding out from the ejector pins and sleeves.

ch3solutions
Posts: 13
Joined: Tue Feb 27, 2018 9:42 am

Re: Mold Lubrication

Post by ch3solutions » Wed Mar 13, 2019 8:54 am

we use a clear grease from PPE, this is the part # FMG07 7 lb. pail (1 gal.) We do not have bleed out issues with this grease. We use the PPE ejector pin lube for the ejector pins part# SPRAY NO. EPL-925. The key to to make sure the people applying the grease understand you only need a thin film of grease, do not smear a lot on the leader pins and slides.

Post Reply