MAPP members have access to post on the forum and must be logged in to post. Questions? Please contact info@mappinc.com.

CMM Programming / Inspection Outsourcing

Post Reply
currier101
Posts: 3
Joined: Tue Apr 16, 2019 9:27 am

CMM Programming / Inspection Outsourcing

Post by currier101 » Mon Aug 26, 2019 10:48 am

Good Morning! We are at a peak time right now and are looking for external support for CMM Programming and Inspection. If anyone can provide companies that they recommend or suggest we stay away from, we would appreciate it!

cbeavers
Posts: 18
Joined: Fri Mar 16, 2018 11:55 am

Re: CMM Programming / Inspection Outsourcing

Post by cbeavers » Wed Oct 09, 2019 4:00 pm

Good Afternoon!

We have used a couple folks relatively close to our area, but not sure where are you located. We have used Accu-Check out of Corydon, IN. The other was Core Services and the contractor was based out of Alabama.

https://www.aciquality.com/
https://www.core-services.com/

Hope this helps.

Thanks,
Chuck

sTevenlunDer
Posts: 3
Joined: Tue Nov 13, 2018 9:49 am

Re: CMM Programming / Inspection Outsourcing

Post by sTevenlunDer » Thu Oct 10, 2019 1:28 pm

We have used QC Group from Minnetonka, MN. Very professional and met deadlines!

https://qcgroup.com/

5950 Clearwater Drive, Suite 300
Minnetonka, MN 55343
952-895-1150

currier101
Posts: 3
Joined: Tue Apr 16, 2019 9:27 am

Re: CMM Programming / Inspection Outsourcing

Post by currier101 » Thu Oct 10, 2019 1:55 pm

Thanks for the help!

Post Reply