MAPP members have access to post on the forum and must be logged in to post. Questions? Please contact info@mappinc.com.

Looking for capacity in 1500 and 3000 ton presses

Post Reply
cburkhead
Posts: 6
Joined: Mon Feb 26, 2018 10:23 am

Looking for capacity in 1500 and 3000 ton presses

Post by cburkhead » Tue Jun 16, 2020 4:34 pm

Good afternoon, All. We're quoting a very large package and two of the parts are outside of our tonnage range. Both are being quoted using a custom compounded PC/ABS. Looking for a molder close Elkhart, IN. Please reach out if you have the tonnage and capacity.

Thanks,
Chris Burkhead
Impact Molding
chris.burkhead@impactmolding.com

gfish@rpsystems.com
Posts: 5
Joined: Fri Sep 21, 2018 11:01 am

Re: Looking for capacity in 1500 and 3000 ton presses

Post by gfish@rpsystems.com » Mon Jul 06, 2020 1:11 pm

Hi Chris,

I am not sure if this is too far away but we have open capacity in Fraser, MI or Ankeny, IA in those size ranges. Let us know if we can assist.

Troyonix29
Posts: 51
Joined: Mon Feb 26, 2018 10:09 am

Re: Looking for capacity in 1500 and 3000 ton presses

Post by Troyonix29 » Thu Jul 09, 2020 8:47 am

Chris, I know this is late, but I just wanted to make sure you knew that you can search member capabilities on the website. We have upgraded the search engine to use keywords or you can search by actual tonnage.

Under the Members tab select Search for Members.

Troy

Post Reply